Ubuntu Linux

Ubuntu Hardy Heron upgrade breaks VMWARE

2008-06-02T14:49:00.003-04:00

Here is a comprehensive tutorial on upgrading to Sun's Virtualbox. which compliles correctly during install.

VirtualBox

is Open Source
Uses USB better easeier and without limitations
Allows you to convert existing Vmware virtual machines to VBox.

https://wiki.ubuntu.com/UbuntuMagazine/HowTo/Switching_From_VMWare_To_VirtualBox:_.vmdk_To_.vdi_Using_Qemu_+_VdiTool

Ubuntu / Debian Quick References

2007-08-10T23:48:00.002-04:00

Links to Cheat Sheets

http://fosswire.com/wp-content/uploads/2007/08/fwunixref.pdf
A great cheat sheet
http://people.debian.org/~debacle/refcard/refcard-en-a4.pdf
A small 4x5.5 quick reference
http://www.xminc.com/linux/linuxcheatsheet.pdf
A good guide for CLI

Bash Command Line A to Z

alias Create an alias
apropos Search Help manual pages (man -k)
awk Find and Replace text, database sort/validate/index
break Exit from a loop
builtin Run a shell builtin
bzip2 Compress or decompress named file(s)
cal Display a calendar
case Conditionally perform a command
cat Display the contents of a file
cd Change Directory
cfdisk Partition table manipulator for Linux
chgrp Change group ownership
chmod Change access permissions
chown Change file owner and group
chroot Run a command with a different root directory
cksum Print CRC checksum and byte counts
clear Clear terminal screen
cmp Compare two files
comm Compare two sorted files line by line
command Run a command - ignoring shell functions
continue Resume the next iteration of a loop
cp Copy one or more files to another location
cron Daemon to execute scheduled commands
crontab Schedule a command to run at a later time
csplit Split a file into context-determined pieces
cut Divide a file into several parts
date Display or change the date & time
dc Desk Calculator
dd Data Dump - Convert and copy a file
declare Declare variables and give them attributes
df Display free disk space
diff Display the differences between two files
diff3 Show differences among three files
dig DNS lookup
dir Briefly list directory contents
dircolors Colour setup for `ls'
dirname Convert a full pathname to just a path
dirs Display list of remembered directories
du Estimate file space usage
echo Display message on screen
egrep Search file(s) for lines that match an extended expression
eject Eject removable media
enable Enable and disable builtin shell commands
env Environment variables
ethtool Ethernet card settings
eval Evaluate several commands/arguments
exec Execute a command
exit Exit the shell
expand Convert tabs to spaces
export Set an environment variable
expr Evaluate expressions
false Do nothing, unsuccessfully
fdformat Low-level format a floppy disk
fdisk Partition table manipulator for Linux
fgrep Search file(s) for lines that match a fixed string
file Determine file type
find Search for files that meet a desired criteria
fmt Reformat paragraph text
fold Wrap text to fit a specified width.
for Expand words, and execute commands
format Format disks or tapes
free Display memory usage
fsck File system consistency check and repair
ftp File Transfer Protocol
function Define Function Macros
gawk Find and Replace text within file(s)
getopts Parse positional parameters
grep Search file(s) for lines that match a given pattern
groups Print group names a user is in
gzip Compress or decompress named file(s)
hash Remember the full pathname of a name argument
head Output the first part of file(s)
history Command History
hostname Print or set system name
id Print user and group id's
if Conditionally perform a command
ifconfig Configure a network interface
import Capture an X server screen and save the image to file
install Copy files and set attributes
join Join lines on a common field
kill Stop a process from running
less Display output one screen at a time
let Perform arithmetic on shell variables
ln Make links between files
local Create variables
locate Find files
logname Print current login name
logout Exit a login shell
look Display lines beginning with a given string
lpc Line printer control program
lpr Off line print
lprint Print a file
lprintd Abort a print job
lprintq List the print queue
lprm Remove jobs from the print queue
ls List information about file(s)
lsof List open files
make Recompile a group of programs
man Help manual
mkdir Create new folder(s)
mkfifo Make FIFOs (named pipes)
mkisofs Create an hybrid ISO9660/JOLIET/HFS filesystem
mknod Make block or character special files
more Display output one screen at a time
mount Mount a file system
mtools Manipulate MS-DOS files
mv Move or rename files or directories
netstat Networking information
nice Set the priority of a command or job
nl Number lines and write files
nohup Run a command immune to hangups
nslookup Query Internet name servers interactively
passwd Modify a user password
paste Merge lines of files
pathchk Check file name portability
ping Test a network connection
popd Restore the previous value of the current directory
pr Prepare files for printing
printcap Printer capability database
printenv Print environment variables
printf Format and print data
ps Process status
pushd Save and then change the current directory
pwd Print Working Directory
quota Display disk usage and limits
quotacheck Scan a file system for disk usage
quotactl Set disk quotas
ram ram disk device
rcp Copy files between two machines.
read read a line from standard input
readonly Mark variables/functions as readonly
remsync Synchronize remote files via email
return Exit a shell function
rm Remove files
rmdir Remove folder(s)
rsync Remote file copy (Synchronize file trees)
screen Terminal window manager
scp Secure copy (remote file copy)
sdiff Merge two files interactively
sed Stream Editor
select Accept keyboard input
seq Print numeric sequences
set Manipulate shell variables and functions
sftp Secure File Transfer Program
shift Shift positional parameters
shopt Shell Options
shutdown Shutdown or restart linux
sleep Delay for a specified time
sort Sort text files
source Run commands from a file `.'
split Split a file into fixed-size pieces
ssh Secure Shell client (remote login program)
strace Trace system calls and signals
su Substitute user identity
sum Print a checksum for a file
symlink Make a new name for a file
sync Synchronize data on disk with memory
tail Output the last part of files
tar Tape ARchiver
tee Redirect output to multiple files
test Evaluate a conditional expression
time Measure Program running time
times User and system times
touch Change file timestamps
top List processes running on the system
traceroute Trace Route to Host
trap Run a command when a signal is set(bourne)
tr Translate, squeeze, and/or delete characters
true Do nothing, successfully
tsort Topological sort
tty Print filename of terminal on stdin
type Describe a command
ulimit Limit user resources
umask Users file creation mask
umount Unmount a device
unalias Remove an alias
uname Print system information
unexpand Convert spaces to tabs
uniq Uniquify files
units Convert units from one scale to another
unset Remove variable or function names
unshar Unpack shell archive scripts
until Execute commands (until error)
useradd Create new user account
usermod Modify user account
users List users currently logged in
uuencode Encode a binary file
uudecode Decode a file created by uuencode
v Verbosely list directory contents (`ls -l -b')
vdir Verbosely list directory contents (`ls -l -b')
vi Text Editor
watch Execute/display a program periodically
wc Print byte, word, and line counts
whereis Report all known instances of a command which Locate a program file in the user's path.
while Execute commands
who Print all usernames currently logged in
whoami Print the current user id and name (`id -un')
Wget Retrieve web pages or files via HTTP, HTTPS or FTP
xargs Execute utility, passing constructed argument list(s)
yes Print a string until interrupted
.period Run commands from a file
### Comment / Remark

Essential shortcuts and commands

Ctrl Alt F1
Switch to the first text terminal. Under Linux you can have several (6 in
standard setup) terminals opened at the same time.

Ctrl Alt Fn(n=1..6)
Switch to the nth text terminal.

tty
Print the name of the terminal in which you are typing this command.

Ctrl Alt F7
Switch to the first GUI terminal (if X-windows is running on this terminal).

Ctrl Alt Fn
(n=7..12)
Switch to the nth GUI terminal (if a GUI terminal is running on screen
n-1). On default, nothing is running on terminals 8 to 12, but you can run another server there.

Tab
(In a text terminal) Autocomplete the command if there is only one option,or else show all the available options. It even works at LILO prompt!

Arrow Up
Scroll and edit the command history. Press enter to execute.

Shift PgUp
Scroll terminal output up. Work also at the login prompt, so you can scroll through your bootup messages.

Shift PgDn
Scroll terminal output down.

Ctrl Alt +
(in X-windows) Change to the next X-server resolution (if you set up the X-server to more than one resolution). For multiple resolutions on my standard SVGA card/monitor, I have the following line in the file /etc/X11/XF86Config (the first resolution starts on default, the largest determines the size of the "virtual screen"): Modes "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "1152x864"

Ctrl Alt -
(in X-windows) Change to the previous X-server resolution.

Ctrl Alt Bkspc
(in X-windows) Kill the current X-windows server. Use if the X-windows server crushes
and cannot be exited normally.

Ctrl Alt Del
Shutdown the system and reboot. This is the normal shutdown command for a user at the text-mode console. Don't just press the "reset" button for shutdown.

ctrl c
Kill the current process (mostly in the text mode for small applications).

ctrl d
Log out from the current terminal. See also the next command.

ctrl d
Send [End-of-File] to the current process. Don't press it twice else you also log out (see the previous command).

ctrl s
Stop the transfer to the terminal.

ctrl q
Resume the transfer to the terminal. Try if your terminal mysteriously stops responding.

ctrl z
Send the current process to the background.

exit
Logout. I can also use logout for the same effect. (If you have started a second shell, e.g., using bash the second shell will be exited and you will be back in the first shell, not logged out.)

reset
Restore a screwed-up terminal (a terminal showing funny characters) to default setting. Use if you tried to "cat" a binary file. You may not be able to see the command as you type it.

Ctrl Shift v
Paste the text which is currently highlighted somewhere else.

Ctrl v
This is the normal "copy-paste" operation in Linux. (It doesn't work with Netscape and WordPerfect which use the MS Windows-style "copy-paste". It does work in the text terminal if you enabled "gpm" service using "setup".) Best used with a Linux-ready 3-button mouse
(Logitech or similar) or else set "3-mouse button emulation").

~ (tilde) My home directory (normally the directory

/home/my_login_name). For example, the command cd ~/my_dir will change
my working directory to the subdirectory "my_dir" under my home
directory. Typing just "cd" alone is an equivalent of the command "cd
~".

.
(dot) Current directory. For example, ./my_program will attempt to
execute the file "my_program" located in your current working
directory.

..
(two dots) Directory parent to the current one. For example, the command cd .. will change my current working directory one one level up.

Common Linux commands--system info

pwd Print working directory, i.e., display the name of my current directory on the screen.

hostname Print the name of the local host (the machine on which you are working). Use netconf (as root) to change the name of the machine.

whoami Print my login name.

id username Print user id (uid) and his/her group id (gid), effective id (if different than the real id) and the supplementary groups.

date Print or change the operating system date and time. E.g., I could change the date and time to 2000-12-31 23:57 using this command: date 123123572009

setclock
To set the hardware (BIOS) clock from the system (Linux) clock, use the command (as root)

time Determine the amount of time that it takes for a process to complete + other info. Don't confuse it with the date command. E.g. I can find out how long it takes to display a directory content using: time ls

who Determine the users logged on the machine.

rwho -a(=remote who) Determine all users logged on your network. The rwho service must be enabled for this command to run. If it isn't, run setup as root to enable "rwho".

finger user_name System info about a user. Try: finger root

last Show listing of users last logged-in on your system.

history | more Show the last (1000 or so) commands executed from the command line on the current account. The "| more" causes the display to stop after each screenful.

uptime Show the amount of time since the last reboot.

ps (=print status) List the processes currently run by the current user.

ps axu | more List all the processes currently running, even those without the controlling terminal, together with the name of the user that owns each process.

top Keep listing the currently running processes, sorted by cpu usage (top users first). In KDE, you can get GUI-based Ktop from "K"menu under "System"-"Task Manager" (or by executing "ktop" in an X-terminal).

uname -a (= Unix name with option "all") Info on your (local) server. I can also use guname (in X-window terminal) to display the info more nicely.

free Memory info (in kilobytes).

df -h (=disk free) Print disk info about all the filesystems (in human-readable form)

du / -bh | more (=disk usage) Print detailed disk usage for each subdirectory starting at the "/" (root) directory (in human legible form).

cat /proc/cpuinfo Cpu info--it show the content of the file cpuinfo. Note that the files in the /proc directory are not real files--they are hooks to look at information available to the kernel.

cat /proc/interrupts List the interrupts in use.

cat /proc/version Linux version and other info

cat /proc/filesystems Show the types of filesystems currently in use.

cat /etc/printcap Show the setup of printers.

lsmod (As root. Use /sbin/lsmod to execute this command when you are a non-root user.) Show the kernel modules currently loaded.

set|more Show the current user environment.

echo $PATH Show the content of the environment variable "PATH". This command can be used to show other environment variables as well. Use "set" to see the full environment.

dmesg | less Print kernel messages (the content of the so-called kernel ring buffer). Press "q" to quit "less". Use less /var/log/dmesg to see what "dmesg" dumped into this file right after the last system bootup.

Basic operations

any_command --help |more Display a brief help on a command (works with most commands). "--help" works similar to DOS "/h" switch. The "more" pipe is needed if the output is longer than one screen.

man topic Display the contents of the system manual pages (help) on the topic. Try man man first. Press "q" to quit the viewer. The command info topic works similar and may contain more up-to-date information. Manual pages can be hard to read. Try any_command --help for short, easy to digest help on a command. If more info needed, have a look to the directory /usr/doc. To display manual page from a specific section, I may use something like in this example: man 3 exit (this displays an info on the command exit from section 3 of the manual pages).

apropos topic Give me the list of the commands that have something to to do with my topic.

help command Display brief info on a bash (shell) build-in command.

ls List the content of the current directory. Under Linux, the command "dir" is an alias to ls. Many users have "ls" to be an alias to "ls --color".

ls -al |more List the content of the current directory, all files (also those starting with a dot), and in a long form. Pipe the output through the "more" command, so that the display pauses after each screenful.

cd directory Change directory. Using "cd" without the directory name will take you to your home directory. "cd -" will take you to your previous directory and is a convenient way to toggle between two directories. "cd .." will take you one directory up.

cp source destination Copy files. E.g., cp /home/stan/existing_file_name . will copy a file to my current working directory. Use the "-r" option (for recursive) to copy the contents of whole directories, e.g. , cp -r my_existing/dir/ ~ will copy a subdirectory under my current working directory to my home directory.

mcopy source destination Copy a file from/to a DOS filesystem (no mounting necessary). E.g., mcopy a:\autoexec.bat ~/junk . See man mtools for related commands: mdir, mcd, mren, mmove, mdel, mmd, mrd, mformat ....

mv source destination Move or rename files. The same command is used for moving and renaming files and directories.

ln source destination Create a hard link called destination to the file called source. The link appears as a copy of the original files, but in reality only one copy of the file is kept, just two (or more) directory entries point to it. Any changes the file are automatically visible throughout. When one directory entry is removed, the other(s) stay(s) intact. The limitation of the hard links are: the files have to be on the same filesystem, hard links to directories or special files are impossible.

ln -s source destination Create a symbolic (soft) link called "destination" to the file called "source". The symbolic link just specifies a path where to look for the file. In contradistinction to hard links, the source and destination don't not have to tbe on the same filesystem. In comparison to hard links, the drawback of symbolic links are: if the original file is removed, the link is "broken", symbolic links can also create circular references (like circular references in spreadsheets or databases, e.g., "a" points to "b" and "b" points back to "a").

rm files Remove (delete) files. You must own the file in order to be able to remove it. On many systems, you will be asked or confirmation of deletion, if you don't want this, use the "-f" (=force) option, e.g., rm -f * will remove all files in my current working directory, no questions asked. (Almost always not a good choice)

mkdir directory Make a new directory.

rmdir directory Remove an empty directory.

rm -r files (recursive remove) Remove files, directories, and their subdirectories. Careful with this command as root--you can easily remove all files on the system with such a command executed on the top of your directory tree, and there is no undelete in Linux (yet). But if you really wanted to do it (reconsider), here is how (as root): rm -rf /*

cat filename | more View the content of a text file called "filename", one page a time. The "|" is the "pipe" symbol (on many American keyboards it shares the key with "\") The pipe makes the output stop after each screenful. For long files, it is sometimes convenient to use the commands head and tail that display just the beginning and the end of the file. If you happened to use "cat" a binary file and your terminal displays funny characters afterwards, you can restore it with the command "reset".

less filename Scroll through a content of a text file. Press q when done. "Less" is roughly equivalent to "more" , the command you know from DOS, although very often "less" is more convenient than "more".

pico filename Edit a text file using the simple and standard text editor called pico.

pico -w filename Edit a text file, while disabling the long line wrap. Handy for editing configuration files, e.g. /etc/fstab.

find / -name "filename" Find the file called "filename" on your filesystem starting the search from the root directory "/". The "filename" may contain wildcards (*,?).

locate filename Find the file name of which contains the string "filename". Easier and faster than the previous command but depends on a database that normally rebuilds at night.

./program_name Run an executable in the current directory, which is not on your PATH.

touch filename Change the date/time stamp of the file filename to the current time. Create an empty file if the file does not exist.

xinit Start a barebone X-windows server (without a windows manager).

startx Start an X-windows server and the default windows manager. Works like typing "win" under DOS with Win3.1

startx -- :1 Start another X-windows session on the display 1 (the default is opened on display 0). You can have several GUI terminals running concurrently. Switch between them using , , etc.

xterm (in X terminal) Run a simple X-windows terminal. Typing exit will close it. There are other, more advanced "virtual" terminals for X-windows. I like the popular ones: konsole and kvt (both come with kde) and gnome-terminal (comes with gnome). If you need something really fancy-looking, try Eterm.

xboing (in X terminal). Very nice, old-fashioned game. Many small games/programs are probably installed on your system. I also like xboard (chess).

shutdown -h now (as root) Shut down the system to a halt. Mostly used for a remote shutdown. Use for a shutdown at the console (which can be done by any user).

halt reboot (as root, two commands) Halt or reboot the machine. Used for remote shutdown, simpler to type than the previous command.

Network apps.

netscape (in X terminal) Run netscape (requires a separate Netscape installation). The current versions of Netscape (4.x) are known to be big and buggy. They occasionally crash by vanishing (no other harm done). Also, when not connected to the network , Netscape likes to refuse to do anything (looks like it hanged)-it revives when you connect.

netscape -display host:0.0 (in X terminal) Run netscape on the current machine and direct the output to machine named "host" display 0 screen 0. Your current machine must have a permission to display on the machine "host" (typically given by executing the command xhost current_machine_name in the xterminal of the machine host. Other X-windows program can be run remotely the same way.

lynx file.html View an html file or browse the net from the text mode.

pine A good text-mode mail reader. Another good and standard one is elm. Your Netscape mail will read the mail from your Internet account. pine will let you read the "local" mail, e.g. the mail your son or a cron process sends to you from a computer on your home network. The command mail could also be used for reading/composing mail, but it would be inconvenient--it is meant to be used in scripts for automation.

elm A good tex-mode mail reader. See the previous command.

mutt A really basic but extremely useful and fast mail reader.

mail A basic operating system tool for e-mail. Look at the previous commands for a better e-mail reader. mail is good if you wanted to send an e-mail from a shell script.

licq (in X term) An icq "instant messaging" client. Another good one is kxicq. Older distributions don't have an icq client installed, you have to do download one and install it.

talk username1 Talk to another user currently logged on your machine (or use "talk username1@machinename" to talk to a user on a different computer) . To accept the invitation to the conversation, type the command "talk username2". If somebody is trying to talk to you and it disrupts your work, your may use the command "mesg n" to refuse accepting messages. You may want to use "who" or "rwho" to determine the users who are currently logged-in.

mc Launch the "Midnight Commander" file manager (looks like "Norton Commander" for Linux).

telnet server Connect to another machine using the TELNET protocol. Use a remote machine name or IP address. You will be prompted for your login name and password--you must have an account on the remote machine to login. Telnet will connect you to another machine and let you operate on it as if you were sitting at its keyboard (almost). Telnet is not very secure--everything you type goes in open text, even your password!

rlogin server (=remote login) Connect to another machine. The login name/password from your current session is used; if it fails you are prompted for a password.

rsh server (=remote shell) Yet another way to connect to a remote machine. The login name/password from your current session is used; if it fails you are prompted for a password.

ftp server Ftp another machine. (There is also ncftp which adds extra features and gftp for GUI .) Ftp is good for copying files to/from a remote machine. Try user "anonymous" if you don't have an account on the remote server. After connection, use "?" to see the list of available ftp commands. The essential ftp command are: ls (see the files on the remote system), ASCII, binary (set the file transfer mode to either text or binary, important that you select the proper one ), get (copy a file from the remote system to the local system), mget (get many files at once), put (copy a file from the local system to the remote system), mput (put many files at once), bye (disconnect). For automation in a script, you may want to use ncftpput and ncftpget, for example: ncftpput -u my_user_name -p my_password -a remote.host.domain remote_dir *local.html

minicom Minicom program (looks like "Procomm for Linux").

File (de)compression

tar -zxvf filename.tar.gz (=tape archiver) Untar a tarred and compressed tarball (*.tar.gz or *.tgz) that you downloaded from the Internet.

tar -xvf filename.tar Untar a tarred but uncompressed tarball (*.tar).

gunzip filename.gz Decompress a zipped file (*.gz" or *.z). Use gzip (also zip or compress) if you wanted to compress files to this file format.

bunzip2 filename.bz2 (=big unzip) Decompress a file (*.bz2) zipped with bzip2 compression utility. Used for big files.

unzip filename.zip Decompress a file (*.zip) zipped with a compression utility compatible with PKZIP for DOS.

unarj e filename.arj Extract the content of an *.arj archive.

uudecode -o outputfile filename Decode a file encoded with uuencode. uu-encoded files are typically used for transfer of non-text files in e-mail (uuencode transforms any file into an ASCII file).

Process control

ps (=print status) Display the list of currently running processes with their process IDs (PID) numbers. Use ps axu to see all processes currently running on your system (also those of other users or without a controlling terminal), each with the name of the owner. Use "top" to keep listing the processes currently running.

fg PID Bring a background or stopped process to the foreground.

bg PID Send the process to the background. Opposite to fg. The same can be accomplished with z. If you have stopped jobs, you have to type exit twice in row to log out.

any_command& Run any command in the background (the symbol "&" means "run the proceeding command in the background").

batch any_command Run any command (usually one that is going to take more time) when the system load is low. I can logout, and the process will keep running.

at 17:00 Execute a command at a specified time. You will be prompted for the command(s) to run, until you press d.

kill PID Force a process shutdown. First determine the PID of the process to kill using ps.

killall program_name Kill program(s) by name.

xkill (in an xwindow terminal) Kill a GUI-based program with mouse. (Point with your mouse cursor at the window of the process you want to kill and click.)

lpc (as root) Check and control the printer(s). Type "?" to see the list of available commands.

lpq Show the content of the printer queue. Under KDE (X-Windows), you may use GUI-based "Printer Queue" available from "K"menu-Utilities.

lprm job_number Remove a printing job "job_number" from the queue.

nice program_name Run program_name adjusting its priority. Since the priority is not specified in this example, it will be adjusted by 10 (the process will run slower), from the default value (usually 0). The lower the number (of "niceness" to other users on the system), the higher the priority. The priority value may be in the range -20 to 19. Only root may specify negative values. Use "top" to display the priorities of the running processes.

renice -1 PID (as root) Change the priority of a running process to -1. Normal users can only adjust processes they own, and only up from the current value (make them run slower).

Ctrl c, z, s, and q also belong to this chapter but they were described previously. In short they mean: stop the current command, send the current command to the background, stop the data transfer, resume the data transfer.

Basic administration commands

printtool (as root in X-terminal) Configuration tool for your printer(s). Settings go to the file /etc/printcap.

setup (as root) Configure mouse, soundcard, keyboard, X-windows, system services. There are many distribution-specific configuration utilities, setup is the default on RedHat. Mandrake 7.0 offers very nice DrakConf .

linuxconfig (as root, either in text or graphical mode). You can access and change hundreds of setting from it. Very powerful--don't change too many things at the same time, and be careful with changing entries you don't understand.

xvidtune (in X-terminal). Adjust the settings of the graphical display for all resolutions so as to eliminate black bands, shift the display right/left/up/down, etc. (First use the knobs on your monitor to fit your text mode correctly on the screen.) To make the changes permanent, display the frequencies on the screen and transfer them to the setup file /etc/X11/XF86Config.

alias ls="ls --color=tty" Create an alias for the command "ls" to enhance its format with color. In this example, the alias is also called "ls" and the "color" option is only envoke when the output is done to a terminal (not to files). Put the alias into the file /etc/bashrc if you would like the alias to be always accessible to all users on the system. Type "alias" alone to see the list of aliases on your system.

adduser user_name Create a new account (you must be root). E.g., adduser barbara Don't forget to set up the password for the new user in the next step. The user home directory is /home/user_name.

useradd user_name The same as the command " adduser user_name ".

userdel user_name Remove an account (you must be a root). The user's home directory and the undelivered mail must be dealt with separately (manually because you have to decide what to do with the files).

groupadd group_name Create a new group on your system. Non-essential but can be handy even on a home machine with a small number of users.

passwd Change the password on your current account. If you are root, you can change the password for any user using: passwd user_name

chmod perm filename (=change mode) Change the file access permission for the files you own (unless you are root in which case you can change any file). You can make a file accessible in three modes: read (r), write (w), execute (x) to three classes of users: owner (u), members of the same group as the owner (g), others on the system (o). Check the current access permissions using: ls -l filename If the file is accessible to all users in all modes it will show:

rwxrwxrwx The first triplet shows the file permission for the owner of the file, the second for his/her group, the third for others. A "no" permission is shown as "-". E.g., this command will add the permission to read the file "junk" to all (=user+group+others):

chmod a+r junk This command will remove the permission to execute the file junk from others:

chmod o-x junk Also try here for more info. You can set the default file permissions for the news files that you create using the command umask (see man umask).

chown new_ownername filename chgrp new_groupname filename Change the file owner and group. You should use these two commands after you copy a file for use by somebody else.

su (=substitute user id) Assume the superuser (=root) identity (you will be prompted for the password). Type "exit" to return you to your previous login. Don't habitually work on your machine as root. The root account is for administration and the su command is to ease your access to the administration account when you require it. You can also use "su" to assume any other user identity, e.g. su barbara will make me "barbara" (password required unless I am a superuser).

kernelcfg (as root in X terminal). GUI to to add/remove kernel modules. You can do the same from the command line using the command "insmod", but "insmode" is less "newbie-friendly".

lsmod List currently loaded kernel modules. A module is like a device driver--it provides operating system kernel support for a particular piece of hardware or feature.

modprobe -l |more List all the modules available for your kernel. The available modules are determined by how your Linux kernel was compliled. Every possible module/feature can be compiled on linux as either "hard wired" (fast, non-removable), "module" (maybe slower, but loaded/removable on demand), or "no" (no support for this feature at all).

insmod parport insmod ppa (as root) Insert modules into the kernel (a module is roughly an equivalent of a DOS device driver). This example shows how to insert the modules for support of the external parallel port zip drive (it appears to be a problem to get the external zip drive to work in any other way under RH6.0 ).

rmmod module_name (as root, not essential). Remove the module module_name from the kernel.

setserial /dev/cua0 port 0x03f8 irq 4 (as root) Set a serial port to a non-standard setting. The example here shows the standard setting for the first serial port (cua0 or ttyS0). The standard PC settings for the second serial port (cua1or ttyS1) are: address of i/o port 0x02f8, irq 3. The third serial port (cua2 or ttyS2): 0x03e8, irq 4. The forth serial port (cua3 or ttyS3): 0x02e8, irq 3. Add your setting to /etc/rc.d/rc.local if you want it to be set at the boot time. See man setserial for good a overview.

fdisk (as root) Linux hard drive partitioning utility (DOS has a utility with the same name).

cd /usr/src/linux-2.0.36 make xconfig (as root in X terminal). Nice GUI front-end for configuration of the kernel options in preparation for compilation of your customized kernel. (The directory name contains the version of your Linux kernel so you may need to modify the directory name if your Linux kernel version is different than 2.0.36 used in this example. You also need the "Tk" interpreter and the kernel source code installed. ) The alternatives to "make xconfig" are: "make config" (runs a scripts that asks you questions in the text mode) and "make menuconfig" (runs a text-based menu-driven configuration utility). Try: less /usr/doc/HOWTO/Kernel-HOWTO for more information. After the configuration, you may choose to proceed with kernel compilation of the new kernel by issuing the following commands: make dep make zImage The last command will take some time to complete (maybe 0.5 h, depending on your hardware). It produces the file "zImage", which is your new Linux kernel. Next: make modules make modules_install Read: /usr/doc/HOWTO/Kernel-HOWTO for information on how to install the new kernel. You will probably also find it useful to read "man depmode". Configuration, compilation and installation of a new kernel is not difficult but it CAN lead to problems if you don't know what you are doing.

Compilation of a kernel is a good way to test your hardware, because it involves a massive amount of computing. If your hardware is "flaky", you will most likely receive the "signal 11" error (read the beatiful /usr/doc/FAQ/txt/GCC-SIG11-FAQ). See this for details on kernel upgrade.

depmod -a (as root) Build the module dependency table for the kernel. This can, for example, be useful after installing and booting a new kernel. Use "modprobe -a" to load the modules.

ldconfig (as root) Re-create the bindings and the cache for the loader of dynamic libraries ("ld"). You may want to run ldconfig after an installation of new dynamically linked libraries on your system. (It is also re-run every time you boot the computer, so if you reboot you don't have to run it manually.)

mknod /dev/fd0 b 2 0 (=make node, as root) Create a device file. This example shows how to create a device file associated with your first floppy drive and could be useful if you happened to accidentally erase it. The options are: b=block mode device (c=character mode device, p=FIFO device, u=unbuffered character mode device). The two integers specify the major and the minor device number.

fdformat /dev/fd0H1440 mkfs -c -t ext2 (=floppy disk format, two commands, as root) Perform a low-level formatting of a floppy in the first floppy drive (/dev/fd0), high density (1440 kB). Then make a Linux filesystem (-t ext2), checking/marking bad blocks (-c ). Making the files system is an equivalent to the high-level format.

badblocks /dev/fd01440 1440 (as root) Check a high-density floppy for bad blocks and display the results on the screen. The parameter "1440" specifies that 1440 blocks are to be checked. This command does not modify the floppy.

fsck -t ext2 /dev/hda2 (=file system check, as root) Check and repair a filesystem. The example uses the partition hda2, filesystem type ext2.

dd if=/dev/fd0H1440 of=floppy_image dd if=floppy_image of=/dev/fd0H1440 (two commands, dd="data duplicator") Create an image of a floppy to the file called "floppy_image" in the current directory. Then copy floppy_image (file) to another floppy disk. Works like DOS "DISKCOPY".

Program installation

rpm -ivh filename.rpm (=RedhatPackageManager, install, verbose, hashes displayed to show progress, as root.) Install a content of RedHat rpm package(s) and print info on what happened. Keep reading if you prefer a GUI installation.

rpm -qpi filename.rpm (=RedhatPackageManager, query, package, list.) Read the info on the content of a yet uninstalled package filename.rpm.

rpm -qpl filename.rpm (=RedhatPackageManager, query, package, information.) List the files contained in a yet uninstalled package filename.rpm.

rpm -qf filename (=RedhatPackageManager, query, file.) Find out the name of the *.rpm package to which the file filename (on your hardrive) belongs.

rpm -e packagename (=RedhatPackageManager, erase=uninstall.) Uninstall a package pagckagename. Packagname is the same as the beginning of the *.rpm package file but without the dash and version number.

kpackage gnorpm glint (in X terminal, as root if you want to be able to install packages) GUI fronts to the Red Hat Package Manager (rpm). "glint" comes with RH5.2, "gnorpm" with RH6.0, "kpackage" comes with RH6.1 or must be installed separately but is the best of the three. Use any of them to view which software packages are installed on your system and the what not-yet-installed packages are available on your RedHat CD, display the info about the packages, and install them if you want (installation must be done as root).

Accessing drives/partitions

mount
Examples are shown in the next commands.

mount -t auto /dev/fd0 /mnt/floppy (as root) Mount the floppy. The directory /mnt/floppy must exist, be empty and NOT be your current directory.

mount -t auto /dev/cdrom /mnt/cdrom (as root) Mount the CD. You may need to create/modify the /dev/cdrom file depending where your CDROM is. The directory /mnt/cdrom must exist, be empty and NOT be your current directory.

mount /mnt/floppy (as user or root) Mount a floppy as user. The file /etc/fstab must be set up to do this. The directory /mnt/floppy must not be your current directory.

mount /mnt/cdrom (as user or root) Mount a CD as user. The file /etc/fstab must be set up to do this. The directory /mnt/cdrom must not be your current directory.

umount /mnt/floppy Unmount the floppy. The directory /mnt/floppy must not be your (or anybody else's) current working directory. Depending on your setup, you might not be able to unmount a drive that you didn't mount.

Network administration tools

netconf (as root) A very good menu-driven setup of your network.

pingmachine_name Check if you can contact another machine (give the machine's name or IP), press C when done (it keeps going).

route -n Show the kernel routing table.

nslookup host_to_find Query your default domain name server (DNS) for an Internet name (or IP number) host_to_find. This way you can check if your DNS works. You can also find out the name of the host of which you only know the IP number.

traceroute host_to_trace Have a look how you messages trave to host_to_trace (which is either a host name or IP number).

ipfwadm -F -p m(for RH5.2, seen next command for RH6.0) Set up the firewall IP forwarding policy to masquerading. (Not very secure but simple.) Purpose: all computers from your home network will appear to the outside world as one very busy machine and, for example, you will be allowed to browse the Internet from all computers at once.

echo 1 > /proc/sys/net/ipv4/ip_forward ipfwadm-wrapper -F -p deny ipfwadm-wrapper -F -a m -S xxx.xxx.xxx.0/24 -D 0.0.0.0/0 (three commands, RH6.0). Does the same as the previous command. Substitute the "x"s with digits of your class "C" IP address that you assigned to your home network.

ifconfig (as root) Display info on the network interfaces currently active (ethernet, ppp, etc). Your first ethernet should show up as eth0, second as eth1, etc, first ppp over modem as ppp0, second as ppp1, etc. The "lo" is the "loopback only" interface which should be always active. Use the options (see ifconfig --help) to configure the interfaces.

ifup interface_name (/sbin/ifup to it run as a user) Startup a network interface. E.g.: ifup eth0 ifup ppp0 Users can start up or shutdown the ppp interface only when the right permission was checked during the ppp setup (using netconf ). To start a ppp interface (dial-up connection), I normally use kppp available under kde menu "internet".

ifdown interface_name (/sbin/ifdown to run it as a user). Shut down the network interface. E.g.: ifdown ppp0 Also, see the previous command.

netstat | more Displays a lot (too much?) information on the status of your network.

Graphics-related commands

kghostview my_file.ps Display a postscript file on screen. I can also use the older-looking ghostview or gv for the same end effect.

ps2pdf my_file.ps my_file.pdf Make a pdf (Adobe portable document format) file from a postscript file.

gimp (in X terminal) A humble looking but very powerful image processor. Takes some learning to use, but it is great for artists, there is almost nothing you can't do with gimp. Use your mouse right button to get local menus, and learn how to use layers. Save your file in the native gimp file format *.xcf (to preserve layers) and only then flatten it and save as png (or whatever). There is a large user manual /usr/

gphoto (in X terminal) Powerful photo editor.

Must have these Ubuntu Aps!

2007-08-09T20:21:00.000-04:00

Pidgin is a
multi-protocol Instant Messaging client that allows you to use all of
your IM accounts at once.

Pidgin can
work with:

AIM
Bonjour
Gadu-Gadu
Google Talk
Groupwise
ICQ
IRC
MSN
QQ
SILC
SIMPLE
Sametime
XMPP
Yahoo!
Zephyr

With AllTray you
can dock any application with no native tray icon (like Evolution,
Thunderbird, Terminals) into the system tray. A high-light feature is
that a click on the "close" button will minimize back to system tray.
It works well with Gnome, KDE, XFCE 4*, Fluxbox* and WindowMaker*

* Do not support grag'n'drop.

MythTV project, an
open source software Personal Video Recorder. It lets you build a box
similar to a TiVo or ReplayTV, but much more powerful - and more easily
modified.

gDesklets
are simiar to Vista Sidebars and more akin to Mac OSX desktop widgets.

Install Java run-time on Ubuntu Fiesty

2007-07-26T21:55:00.000-04:00

Download jre-6u2-linux-amd64.bin (or current version) This is the AMD 64Bit version.

If saved to desktop, open a console

cd ~/Desktop
$sudo chmod a+x jre-6u2-linux-amd64.bin
./ jre-6u2-linux-amd64.bin

Scroll through the Terms and conditions, type yes and your done.

DSL and other linux on USB

2007-03-05T10:02:00.000-05:00

These are the best and easiest instructions I've found so far for creating a Linux bootable USB Flash Drive

http://pendrivelinux.com/2007/01/02/all-in-one-usb-dsl

Substitute USBDSL.zip with other Distros to match your preference.
Such as: USBEdgy.zip

See this link for more Linux options
http://pendrivelinux.com/

Ubuntu Troubleshooting X problems

2007-03-03T08:04:00.000-05:00

http://www.psychocats.net/ubuntu/nox

Mount alternate installer CD instead of internet
sudo apt-cdrom add

To install the full Gnome desktop
sudo aptitude updatesudo aptitude install ubuntu-desktop

To start Gnome
sudo /etc/init.d/gdm start

How to install ANYTHING in Ubuntu

2007-03-03T07:54:00.000-05:00

http://cutlersoftware.com/ubuntuinstall/

Installing software with the terminal

apt-get
aptitude

Installing a package manually (.deb, .rpm, .tar.gz, .package, klik:// → .cmg, .sh, .bin, .exe, ...)

Source Package (.tar, .tar.gz, .tgz, .tar.bz, ...)
Klik package (klik:// → .cmg)

GUI

synaptic
(.deb)
(.rpm)
Themes (.tar, .tar.gz, .tgz, .tar.bz, ...)
Source Package (.tar, .tar.gz, .tgz, .tar.bz, ...)
Klik package (klik:// → .cmg)

Getting Back to a Pure XFCE on Ubuntu

2007-03-03T07:46:00.000-05:00

This tutorial will show you how to remove KDE, Gnome and return to pure xfce

http://www.psychocats.net/ubuntu/purexfce

Install and Configure Xserver

2007-03-02T15:38:00.000-05:00

To install GUI

Code:
sudo aptitude install xorg
then either one of gdm, xdm, or kdm.

Code:
sudo aptitude install gdm/xdm/kdm
then either xubuntu-desktop, ubuntu-desktop, kubuntu-desktop. Or xfce/gnome/kde/openbox/etc I use xfce so I did.

Code:
sudo aptitude install xfce4

The difference between xfce and xubuntu is that xubuntu comes with more apps. I think the same applies to gnome/ubuntu kde/kubuntu.

If you decide to go the Xubuntu route, but choose to install the xfce4 package make sure to installing thunar alongside it, otherwise you'll have no file browser.Edit: Although xfce4 might install Thunar automatically, it's probably safer to install the xubuntu-desktop metapackage.
The command to reconfigure the x-server is

Code:
sudo dpkg-reconfigure xserver-xorg

Mounting Devices

2007-02-25T22:41:00.000-05:00

`/etc/fstab`: Automating the mount process

The file /etc/fstab (it stands for "file system table") contains descriptions of filesystems that you mount often. These filesystems can then be mounted with a shorter command, such as mount /cdrom. You can also configure filesystems to mount automatically when the system boots. You'll probably want to mount all of your hard disk filesystems when you boot.

Look at this file now, by typing more /etc/fstab. It will have two or more entries that were configured automatically when you installed the system. It probably looks something like this:

     # /etc/fstab: static file system information.
    #
    #                
    /dev/hda1            /               ext2    defaults    0       1
    /dev/hda3            none            swap    sw          0       0
    proc                 /proc           proc    defaults    0       0
  
    /dev/hda5            /tmp            ext2    defaults    0       2
    /dev/hda6            /home           ext2    defaults    0       2
    /dev/hda7            /usr            ext2    defaults    0       2
  
    /dev/hdc             /cdrom          iso9660 ro          0       0
    /dev/fd0             /floppy         auto    noauto,sync 0       0

The first column lists the device the filesystem resides on. The second lists the mount point, the third the filesystem type. The line beginning proc is a special filesystem explained in The proc filesystem, Section 4.8.3. Notice that the swap partition (/dev/hda3 in the example) has no mount point, so the mount point column contains none.

The last three columns may require some explanation.

The fifth column is used by the dump utility to decide when to back up the filesystem. FIXME: cross ref to dump

The sixth column is used by fsck to decide in what order to check filesystems when you boot the system. The root filesystem should have a 1 in this field, filesystems which don't need to be checked (such as the swap partition) should have a 0, and all other filesystems should have a 2. FIXME: cross ref to fsck, also, is the swap partition really a filesystem?

Column four contains one or more options to use when mounting the filesystem. Here's a brief summary (some of these probably won't make much sense yet - they're here for future reference):

async and sync: Do I/O synchronously or asynchronously. Synchronous I/O writes changes to files immediately, while asynchronous I/O may keep data in buffers and write it later, for efficiency reasons. FIXME: cross ref to section on sync for full explanation. Also, should recommend when to choose one or the other.

ro and rw: Mount the filesystem read-only or read-write. If you don't need to make any changes to the filesystem, it's a good idea to mount it read-only so you don't accidentally mess something up. Also, read-only devices (such as CD-ROM drives and floppy disks with write protection tabs) should be mounted read-only.

auto and noauto: When the system boots, or whenever you type mount -a, mount tries to mount all the filesystems listed in /etc/fstab. If you don't want it to automatically mount a filesystem, you should use the noauto option. It's probably a good idea to use noauto with removable media such as floppy disks, because there may or may not be a disk in the drive. You'll want to mount these filesystems manually after you put in a disk.

dev and nodev: Use or ignore device files on this filesystem. You might use nodev if you mount the root directory of another system on your system - you don't want your system to try to use the devices on the other system.

user and nouser: Permit or forbid ordinary users to mount the filesystem. nouser means that only root can mount the filesystem. This is the normal arrangement. You might use the user option to access the floppy drive without having to be root.

exec and noexec: Allow or do not allow the execution of files on this filesystem. Probably you won't need these options.

suid and nosuid: Allow or do not allow the suid bit to take effect. Probably you won't need these options. See Making files suid/sgid, Section 4.8.4.2.

defaults: Equivalent to: rw, dev, suid, exec, auto, nouser, async. You can specify defaults followed by other options to override specific aspects of defaults.

fstab Syntax

Quote:

[Device] [Mount Point] [File_system] [Options] [dump] [fsck order]

Device = Physical location.
/dev/hdxy or /dev/sdxy.
x will be a letter starting with a, then b,c,....
y will be a number starting with 1, then 2,3,....
Thus hda1 = First partition on the master HD.

See Basic partitioning for more information

Note: zip discs are always numbered "4".
Example: USB Zip = /dev/sda4.

Note: You can also identify a device by udev, volume label (AKA LABEL), or uuid.

These fstab techniques are helpful for removable media because the device (/dev/sdxy) may change. For example, sometimes the USB device will be assigned /dev/sda1, other times /dev/sdb1. This depends on what order you connect USB devices, and where (which USB slot) you use to connect. This can be a major aggravation as you must identify the device before you can mount it. fstab does not work well if the device name keeps changing.

To list your devices, first put connect your USB device (it does not need to be mounted).
By volume label:

Code:

ls /dev/disk/by-label -lah

By id:

Code:

ls /dev/disk/by-id -lah

By uuid:

Code:

ls /dev/disk/by-uuid -lah

IMO, LABEL is easiest to use as you can set a label and it is human readable.

The format to use instead of the device name in the fstab file is:
LABEL= (Where is the volume label name, ex. "data").
UUID= (Where is some alphanumeric (hex) like fab05680-eb08-4420-959a-ff915cdfcb44).
Again, IMO, using a label has a strong advantage with removable media (flash drives).
See How to use Labels below.
For udev: udev does the same thing as LABEL, but I find it more complicated.
See How to udev for a very nice how to on udev.

Mount point.
This is where the partition is mounted or accessed within the "tree" (ie /mnt/hda1).
You can use any name you like.
In general

/mnt Typically used for fixed hard drives HD/SCSI.
/media Typically used for removable media (CD/DVD/USB/Zip).

Examples:

/mnt/windows
/mnt/data
/media/usb

To make a mount point:

Code:

sudo mkdir /media/usb

File types:
Linux file systems: ext2, ext3, jfs, reiserfs, reiser4, xfs, swap.

Windows:
vfat = FAT 32, FAT 16
ntfs= NTFS

Note: For NTFS rw ntfs-3g

CD/DVD/iso: iso9660

To mount an iso image (*.iso NOT CD/DVD device):
Code:
sudo mount -t iso9660 -o ro,loop=/dev/loop0  

Network file systems:
nfs Example:

Quote:

server:/shared_directory /mnt/nfs nfs 0 0

Make a directory for each device to mount it

makedir /floppy
makedir /cdrom
makedir /usb

Mounting a filesystem

Before mounting a filesystem, or to actually create a filesystem on a disk that doesn't have one yet, it's necessary to refer to the devices themselves. All devices have names, and these are located in the /dev directory. If you type ls /dev now, you'll see a pretty lengthy list of every possible device you could have on your Debian system.

Possible devices include:

/dev/hda is IDE drive A, usually called C:\ on a DOS or Windows system. In general, this will be a hard drive. IDE refers to the type of drive - if you don't know what it means, you probably have this kind of drive, because it's the most common.

/dev/hdb is IDE drive B, as you might guess. This could be a second hard drive, or perhaps a CD-ROM drive. Drives A and B are the first and second (master and slave) drives on the primary IDE controller. Drives C and D are the first and second drives on the secondary controller.

/dev/hda1 is the first partition of IDE drive A. Notice that different drives are lettered, while specific partitions of those drives are numbered as well.

/dev/sda is SCSI disk A. SCSI is like IDE, only if you don't know what it is you probably don't have one. They're not very common in home Intel PC's, though they're often used in servers and Macintoshes often have SCSI disks.

/dev/fd0 is the first floppy drive, generally A:\ under DOS. Since floppy disks don't have partitions, they only have numbers, rather than the letter-number scheme used for hard drives. However, for floppy drives the numbers refer to the drive, and for hard drives the numbers refer to the partitions.

/dev/ttyS0 is one of your serial ports. /dev contains the names of many devices, not just disk drives.

To mount a filesystem, tell Linux to associate whatever filesystem it finds on a particular device with a particular mount point.

su
If you haven't already, you need to either log in as root or gain root privileges with the su (super user) command. If you use su, enter the root password when prompted.

ls /cdrom
See what's in the /cdrom directory before you start. If you don't have a /cdrom directory, you may have to make one using mkdir /cdrom.

mount
Typing simply mount with no arguments lists the currently mounted filesystems.

mount -t iso9660 CD device /cdrom
For this command, you should substitute the name of your CD-ROM device for CD device in the above command line. If you aren't sure, /dev/hdc is a good guess. If that fails, try the different IDE devices: /dev/hda, etc. You should see a message like:
```
     mount: block device /dev/hdc is write-protected, mounting read-only
```
The -t option specifies the type of the filesystem, in this case iso9660. Most CDs are iso9660. The next argument is the name of the device to mount, and the final argument is the mount point. There are many other arguments to mount; see the man page for details. (For example, you could avoid the above message by specifying read-only on the command line.)
Once a CD is mounted, you may find that your drive tray will not open. You must unmount the CD before removing it.

ls /cdrom
Confirm that /cdrom now contains whatever is on the CD in your drive.

mount
Look at the list of filesystems again, noticing that your CD drive is now mounted.

umount /cdrom
This unmounts the CD. It's now safe to remove the CD from the drive. Notice that the command is umount with no "n", even though it's used to unmount the filesystem.

Rights and installing

2007-02-24T17:43:00.001-05:00

Apt-Get

The apt-get command is a powerful command-line tool used to work with Ubuntu's Advanced Packaging Tool (APT) performing such functions as installation of new software packages, upgrade of existing software packages, updating of the package list index, and even upgrading the entire Ubuntu system.

Being a simple command-line tool, apt-get has numerous advantages over other package management tools available in Ubuntu for server administrators. Some of these advantages include ease of use over simple terminal connections (SSH) and the ability to be used in system administration scripts, which can in turn be automated by the cron scheduling utility.

Some examples of popular uses for the apt-get utility:

Install a Package: Installation of packages using the apt-get tool is quite simple. For example, to install the network scanner nmap, type the following:
```
sudo apt-get install nmap 
```
Remove a Package: Removal of a package or packages is also a straightforward and simple process. To remove the nmap package installed in the previous example, type the following:
```
sudo apt-get remove nmap 
```

Ubuntu command line package install

2007-02-24T17:17:00.001-05:00

Installing downloaded packages

Sometimes you might want to install a package which you have downloaded from a website, rather than from a software repository. These packages are called .deb files. Because they may have been created for a different Linux distribution, they may have unmet dependencies on Ubuntu and so may not be installable.

Using GDebi to install packages

GDebi is a graphical application used to install packages. It automatically checks packages for their dependencies and will try to download them from the Ubuntu software repositories if possible. You may first need to install GDebi - simply install the gdebi package using one of the package managers listed above, or open a Terminal and type sudo apt-get install gdebi.

Once you have installed GDebi, use the File Browser to find the package you wish to install. Package files will look similar to this:

Double-click the package to open it with GDebi. If all dependencies have been met for the selected package, simply click the 'Install package' button to install it. GDebi will warn you if there are unmet dependencies.

Using the Kubuntu Package Management Utility

To install a .deb file in Kubuntu, right-click on the .deb file, and choose Kubuntu Package Menu->Install Package.

Using dpkg to install packages

dpkg is a command-line tool used to install packages. To install a package with dpkg, open a Terminal and type the following:

cd directory
sudo dpkg -i package_name.deb

Note: replace directory with the directory in which the package is stored and package_name with the filename of the package.

It is recommended that you read the dpkg manual page before using dpkg, as improper use may break the package management database. To view the manual page for dpkg, open a Terminal and type man dpkg.

Can't login after installing Gnome, KDE

2007-02-24T17:09:00.000-05:00

NEVER use sudo to start graphical programs. You should always use gksudo or kdesu to run such programs, otherwise new login attempts may fail. If this happens and at login an error message reports: "Unable to read ICE authority file", log in using the failsafe terminal and execute the command below substituting user for your username.

rm /home/user/.{ICE,X}authority

To start a root shell (i.e. a command window where you can run root commands) use:

sudo -i

To login as another user (on the command line, use something like gdmflexiserver for a graphical login)

sudo -i -u username

Ubuntu Linux

Ubuntu Hardy Heron upgrade breaks VMWARE

Ubuntu / Debian Quick References

Essential shortcuts and commands

Must have these Ubuntu Aps!

Install Java run-time on Ubuntu Fiesty

DSL and other linux on USB

Ubuntu Troubleshooting X problems

How to install ANYTHING in Ubuntu

Getting Back to a Pure XFCE on Ubuntu

Install and Configure Xserver

Mounting Devices

/etc/fstab: Automating the mount process

Make a directory for each device to mount it

Mounting a filesystem

Rights and installing

Apt-Get

Ubuntu command line package install

Installing downloaded packages

Using GDebi to install packages

Using the Kubuntu Package Management Utility

Using dpkg to install packages

Can't login after installing Gnome, KDE

`/etc/fstab`: Automating the mount process